Maxron R-22 Refrigerant Gas — Kenya
Maxron R-22 refrigerant in Kenya from Olinc Industrial. Full specs, phase-out info, safe handling & storage, maintenance guidance, compatibility & retrofit advice.
What is Maxron R-22?
Maxron R-22 is a hydrochlorofluorocarbon (HCFC) refrigerant — chemical name chlorodifluoromethane (CHClF₂). Dandy Solutions LTD+3Dandy Solutions LTD+3Al-Ramize Equipment+3
It is sold under the Maxron brand and widely used in older air-conditioning and refrigeration systems. In Kenya you can purchase it via Olinc Industrial Products & Equipment Ltd as part of their refrigerant gas portfolio.
Because R-22 has ozone–depleting potential, it is being phased out globally under the Montreal Protocol and related regulations. Dandy Solutions LTD+2Dandy Solutions LTD+2
Typical Applications
Maxron R-22 is appropriate for:
- Residential air-conditioning systems (split units, package A/C)
- Commercial/industrial chillers and comfort-cooling systems
- Medium-temperature and some low-temperature refrigeration systems
Transport refrigeration legacy systems that still use R-22-based equipment
Sources
Because many newer systems now use HFCs or other blends, R-22 is mostly relevant for servicing or maintaining existing equipment rather than new installations.
Technical Specifications (Typical values)
| Property | Typical / Expected value |
|---|---|
| Chemical name | Chlorodifluoromethane (CHClF₂) Dandy Solutions LTD+1 |
| Molecular weight | ~ 86.46 g/mol Dandy Solutions LTD |
| Boiling point (1 atm) | ≈ –40.8 °C Al-Ramize Equipment+1 |
| Appearance | Liquefied, colourless gas HVACR Wholesale Dealer & Supplier UAE+1 |
| Odour | Slight ether-like HVACR Wholesale Dealer & Supplier UAE+1 |
| Safety classification | Non-flammable, low toxicity (ASHRAE A1 for many HCFCs) — though check brand/MSDS |
| Ozone Depletion Potential (ODP) | Moderate (not zero) — used in older systems; R-22 is being phased out Al-Ramize Equipment+1 |
| Lubricant compatibility | Works with mineral oils, alkyl benzene oils, or POE oils (subject to equipment design) Dandy Solutions LTD |
Note: Exact values (pressures, densities, glide) should be checked in the official Maxron or supplier TDS / MSDS for the batch you receive.
Phase-Out & Regulatory Considerations
- R-22 is subject to phase-out under the Montreal Protocol and many national regulations.
- New equipment is typically not charged with R-22; many regions restrict import/manufacture for new systems.
- For servicing, reclaimed or recovered R-22 may still be available, but supply will shrink and cost may increase.
Clients should plan for transition/retrofit to newer, lower-ODP/GWP refrigerants when systems require major overhaul.
Compatibility, Service & Retrofit Guidance
When using Maxron R-22 or servicing R-22 systems, consider:
- Lubricant: R-22 systems often use mineral oil; if converting to a replacement refrigerant you may need POE oil or other lubricant.
- Component compatibility: If retrofitting to new refrigerant, check compressor, oil, seals, expansion devices, and performance curves.
- Charging: Ensure correct charge weight; maintain system design conditions; leak-free system is critical.
- Older systems: If system is aging, clients should evaluate whether continuing R-22 servicing is cost-effective vs full replacement to new refrigerant/systems.
Safety, Handling & Storage Guidelines
Safety & Health
- Although non-flammable under normal conditions, R-22 can displace oxygen in enclosed spaces — ensure proper ventilation.
- Contact with liquid refrigerant can cause frostbite — use PPE (gloves, goggles, protective clothing).
- Avoid exposing cylinders to high heat or flames; decomposition may release toxic by-products.
For servicing: use leak detectors; do not mix refrigerants; avoid topping up without leak check/leak repair.
Storage & Cylinder Handling
- Store cylinders upright, secured, in a cool, well-ventilated area.
- Avoid direct sunlight or temperatures exceeding ~45–50 °C.
- Valve protection caps should be installed when not in use; full and empty cylinders should be segregated.
- Use carts for transport; do not roll or drop cylinders; follow local Kenyan/EA transport regulations.
Environmental Impact
- R-22 has non-zero ODP — it contributes to ozone layer depletion (though less than older CFCs) and therefore is being phased out.
- Because of this, its future availability and cost will likely become more restrictive.
Clients should emphasise leak prevention, refrigerant recovery, and transition planning — especially since newer refrigerants offer much lower environmental impact.
Maintenance & Best Practice Checklist
- Scheduled leak‐detection, particularly in older equipment.
- Detailed logbook of refrigerant use (serial numbers, cylinder batches, service history).
- Oil and lubricant checks if system has been open or retrofitted.Replace filter driers/moisture traps after major service or contamination.
- Monitor system performance (pressures, temperatures, compressor load) — look for signs of inefficiency or stress.
During end-of‐life, recover refrigerant properly; contact certified reclaimers; do not vent to atmosphere.
Why Choose Maxron R-22 via Olinc Industrial Products & Equipment Ltd (Kenya)
- Authentic Maxron refrigerant, distributed locally by Olinc, ensuring verified quality.
- Local technical support and stock-availability in Kenya.
- Supply of cylinder sizes suitable for Kenyan market (service cans, cylinders).
- Documentation: MSDS/TDS available on request.
Support for older systems that still operate on R-22, giving clients continuity while they plan for transition.
Applications of Maxron R-22
Maxron R-22 is a versatile refrigerant suitable for:
- Central air-conditioning and split A/C systems
- Window-type and portable air conditioners
- Industrial chillers and refrigeration plants
- Food storage and processing facilities
- Cold rooms and refrigerated trucks
- Heat pumps and dehumidifiers
Supermarket refrigeration systemsIce-making machines
Its wide application range and efficiency make it one of the most demanded refrigerants in Kenya.
Benefits of Using Maxron R-22 in Kenya
- Proven Cooling Efficiency: Excellent performance for both low- and medium-temperature systems.
- Energy Saving: Maintains high efficiency, reducing power consumption.
- Wide Compatibility: Works with a wide range of existing air conditioning and refrigeration systems.
- Thermally Stable: Performs efficiently in Kenya’s hot climate.
- Cost Effective: Affordable refrigerant solution for large installations.
- Reliable Supply: Olinc ensures consistent quality and availability across Kenya.
Price of Maxron R-22 in Kenya
The price of Maxron R-22 refrigerant gas in Kenya varies depending on quantity, cylinder size, and market rates.
On average:
- 13.6 kg disposable cylinder: between KES 18,000 – 23,000
- Wholesale / bulk supply: discounted rates available
For accurate and up-to-date prices, contact Olinc Industrial Products directly.
Why Buy Maxron R-22 from Olinc Industrial Products & Equipment Ltd
- Trusted authorized supplier of genuine Maxron refrigerants
- Competitive wholesale and retail prices
- Comprehensive technical support and guidance
- Nationwide delivery across Kenya
- Offers related HVAC equipment – compressors, copper pipes, insulation materials, and valves
Excellent after-sales service and warranty support
Olinc is your reliable partner for all air-conditioning and refrigeration solutions in Kenya.
Frequently Asked Questions (FAQs)
Is Maxron R-22 the same as R-22 refrigerant?
Yes. “Maxron R-22” refers to the brand of R-22 refrigerant supplied by Olinc Industrial Products & Equipment Ltd.
Is R-22 still allowed in Kenya?
Yes, R-22 is still available for servicing existing equipment but is being gradually phased out in line with international environmental agreements.
Can R-22 be replaced with other refrigerants?
Yes, suitable replacements include R-407C, R-422D, and R-438A, depending on system design and performance needs.
How long does R-22 last in a system?
If well maintained and free from leaks, R-22 can last over 10 years in a properly sealed refrigeration system.
Is R-22 harmful to the environment?
It has a low ODP but contributes to global warming, so recovery and recycling are essential for environmental protection.
Contact Olinc Industrial Products & Equipment Ltd
Location: Nairobi, Kenya
Phone: +254 722 830 970
Email: info@olincindustrial.com
Website: www.olincindustrial.com